Sharp Atomic Clock Spc373 User Manual Here

Local interference from electronics, thick walls, or distance from the transmitter.

Replace the battery cover. The screen will light up, beep, and begin scanning for the atomic signal. Step 2: Atomic Signal Search

The LCD screen will briefly turn on all segments, beep once, and automatically enter atomic signal search mode. 📡 Understanding the Atomic Signal (WWVB)

Press the ALARM button once to view the alarm time. sharp atomic clock spc373 user manual

The clock features an automatic Daylight Saving Time adjustment. Locate the switch on the back of the clock.

The alarm will stop sounding and ring again after 5 minutes.

Press the TIME ZONE button on the back of the clock repeatedly until your specific region is displayed on the screen (P, M, C, or E). Step 2: Atomic Signal Search The LCD screen

Congratulations on purchasing the Sharp Atomic Clock SPC373! This user manual will guide you through the easy operation and maintenance of your new clock. The Sharp Atomic Clock SPC373 is a highly accurate and reliable timekeeping device that receives atomic time signals from Germany and Japan to ensure precise timekeeping.

For best results, keep the clock away from large metal surfaces which can block radio waves.

Use a soft, dry cloth to clean the display. Never use harsh chemical cleaners. Locate the switch on the back of the clock

Use UP or DOWN to select the current month. Press SET to confirm.

Place the clock on a window sill facing Colorado overnight. Keep it away from interference sources like computers, televisions, microwave ovens, or wireless routers. Press the WAVE button to trigger a manual search at night, when the atmosphere allows the radio signal to travel farther. Faded Display or Weak Backlight

The Sharp SPC373 updates its internal timekeeping daily by listening for the WWVB radio signal.

Replace the battery with a high-quality alkaline battery. Weak batteries are the most common cause of poor signal reception.

Adjusts values during configuration. The UP button also toggles between 12-hour and 24-hour time formats, while the DOWN button toggles between Fahrenheit (°F) and Celsius (°C).