Satlink Ws6906 Software Upgrade Info
Perform a factory reset ( Menu → System → Factory Reset ) to clear old configuration data that may conflict with new firmware. Then, re-enter your preferred settings (LNB type, DiSEqC orders, etc.).
: Older firmware versions suffer from memory bugs that crash the device. Prerequisites and Required Tools
The upgrade process takes approximately one minute. Do not disconnect the USB cable or power off the device during this time, as interrupting the process could permanently damage your meter.
The classic method for upgrading the SATLINK WS6906 uses an RS‑232 serial connection. Here is the step‑by‑step process based on documented user experiences:
: If the software displays "CHECK SERIAL PORT STATUS," turn your satlink ws6906 software upgrade
Before diving into the "how," it is essential to understand the "why." Many users neglect firmware updates, only to find their device struggling with modern signals. Here are the primary reasons to perform a software upgrade:
Windows PC (Note: USB-to-RS232 drivers may be required for modern systems). SatlinkTools or Upgrade.exe utility.
Firmware updates often contain outdated satellite transponder lists. Take a few minutes to manually edit or add current, active frequencies for your target satellites via the TP Control menu to ensure accurate locking out in the field.
Satellite technology is constantly evolving. A firmware update on the WS6906 typically brings critical improvements that go beyond just fixing bugs, often making the difference between a frustrating installation and a perfect signal lock. Perform a factory reset ( Menu → System
Newer firmware versions often resolve issues like screen flickering, battery indicator inaccuracies, or sudden freezes.
According to multiple user reports, the WS6906 does support direct upgrades via USB flash drive. Attempting to update by inserting a USB stick with firmware files reportedly does nothing. One frustrated user wrote: “über usb stick am gerät geht es nicht” (via USB stick on the device does not work).
Software like "Satlink Tool" or "Upgrade.exe" specifically designed for the WS-6906. Step-by-Step Guide to the Satlink WS-6906 Software Upgrade 1. Identify Your Hardware Version
Connect the RS-232 cable to the PC and the WS-6906's upgrade port. Initialization: Power on the satellite finder. Prerequisites and Required Tools The upgrade process takes
Click to modify the satellites/transponders (236KB file).
After completion, the device will reboot to normal operation. Navigate to . Confirm that the firmware version matches the new one.
Loop back to Step 1. Most bootloaders remain responsive to serial commands even if the primary operating system is corrupted. Attempt to re-flash the unit using a verified, stable factory firmware version. To help find the right tools, let me know: What operating system version is your computer running?
Last updated: October 2025 – Compatible with Satlink WS6906 hardware revisions V2.0 to V3.2
The Satlink WS-6906 is a classic, dependable DVB-S signal meter. However, satellite transponder frequencies change frequently. Over time, the pre-loaded factory data becomes obsolete. A software upgrade provides: