Hp Fxn1 E93839 Motherboard Specs Jun 2026

Dual-channel support for increased bandwidth. Expansion and Storage Slots

The motherboard often features a built-in I/O shield or unique spacing that doesn't fit standard case openings. 3. Graphics Card Fitment

The HP FXN1 E93839 is a motherboard commonly found in Hewlett-Packard’s business-class desktop computers, specifically within the Compaq and ProDesk series. Manufactured by Foxconn (indicated by the FXN1 designation), this board was designed for reliability and office productivity during the early-to-mid 2010s.

HP FXN1 motherboard specs, E93839 part number, LGA 1155 HP motherboard, HP Compaq 8200 Elite motherboard, proprietary HP power connector, HP Q65 chipset, motherboard upgrade guide. hp fxn1 e93839 motherboard specs

1x RS-232 Serial port (Common for older office peripherals). Power and Installation Notes

Installing a SATA SSD as your primary boot drive will be the single most noticeable upgrade for everyday use. On the Compaq 8200 Elite (Q67 chipset), the SATA ports are SATA II, which will limit an SSD's sequential speeds to around 250-300 MB/s. However, this is still many times faster than a mechanical hard drive, resulting in near-instant boot and loading times.

If you are planning to upgrade a system utilizing the HP FXN1 E93839 motherboard, or considering transplanting it into a new case, you must navigate several proprietary roadblocks: 1. Power Supply Unit (PSU) Limitations Dual-channel support for increased bandwidth

Despite its compact size, the board offers essential expansion options for business and light computing:

1066 MHz, 1333 MHz, or 1600 MHz (Speed scales down depending on the installed CPU). Maximum Capacity: 16 GB total (2 x 8GB modules). Expansion Slots and Storage

Note on Revisions : Certain rare, later-market industrial or system-refresh versions marked "E93839 FXN1" ship configured for newer ecosystems, featuring LGA 1151 sockets designed for 6th Gen Intel "Skylake" CPUs like the Core i5-6500 alongside DDR4 RAM. Check the physical layout of your exact revision before purchasing replacement components. Memory & Storage Architecture RAM Configuration Graphics Card Fitment The HP FXN1 E93839 is

The HP FXN1 E93839 motherboard is a replacement board found in specific HP ProDesk and EliteDesk business desktops. This guide provides the technical specifications, compatibility layout, and upgrade options for this hardware component. Form Factor and Dimensions Custom proprietary form factor. Layout: Non-standard ATX design. Fit: Fits specific HP chassis. Processor and Socket Support Socket: Intel LGA 1150 socket. Generation: 4th Generation Intel Core. Architectures: Haswell and Haswell Refresh. Core Series: Intel Core i3, i5, i7. Other Series: Pentium and Celeron processors. Chipset and Performance Chipset: Intel Q85 or Q87 Express. Target: Business-class stability and management. Security: Trusted Platform Module (TPM) chip. Memory Capabilities Slots: 4 DIMM slots available. Type: DDR3 or DDR3L unbuffered non-ECC. Speed: 1333 MHz or 1600 MHz. Maximum: Up to 32 GB system memory. Architecture: Dual-channel memory support. Expansion Slots Graphics: 1 x PCI Express x16 slot. Secondary: 1 x PCI Express x16 (wired x4). Peripherals: 2 x PCI Express x1 slots. Storage Interface SATA: 3 to 4 SATA ports. Speed: SATA III (6 Gbps) data rates. RAID: Supported on specific configurations. Rear I/O Panel Ports Video: 2 x DisplayPort outputs. Legacy Video: 1 x VGA output port. USB 3.0: 4 x USB 3.0 ports. USB 2.0: 2 x USB 2.0 ports. Network: 1 x RJ-45 Gigabit Ethernet. Audio: 1 x Line-In, 1 x Line-Out. Legacy Data: 2 x PS/2 keyboard/mouse ports. Serial: 1 x Serial COM port. Power and Internal Connectors Main Power: Proprietary HP 6-pin connector. CPU Power: Standard 4-pin ATX connector. Fans: 1 x CPU fan header. System Fans: 1 x System fan header. Compatibility Notes

The HP FXM1 (part number E93839) is a micro-ATX motherboard manufactured by Pegatron (a common HP OEM supplier). It was predominantly used in the HP Pavilion p6-2xxx and HP Compaq Presario CQ-2xxx series desktops produced around 2011–2012 . This board is based on the Intel H61 chipset, designed specifically for Intel’s 2nd generation (Sandy Bridge) processors, with limited support for 3rd generation (Ivy Bridge) CPUs after a BIOS update.

The motherboard provides a robust set of expansion options suitable for upgrading graphics, storage, and I/O capabilities.

HP FXN1 E93839 motherboard (often identified by part numbers 611834-001 611794-000 ) is a proprietary system board primarily found in the HP Compaq 8200 Elite