Kolbus Da 36 Manual __full__ Jun 2026

KB-DA36-OM-EN Revision: 2.4 Applicability: Kolbus DA 36 Casemaking Machine (All serial numbers up to 2025)

The or serial number of your machine.

The is a high-performance, single-head machine designed for producing book cases, lever arch files, and ring binders. It is celebrated for its ability to handle various covering materials, including paper, cloth, and PVC.

: Includes integrated corner cutting devices, pressure rollers to eliminate bubbles or wrinkles, and a motorized delivery belt for finished covers. Physical Footprint : A standard unit typically measures approximately 4300 x 1150 x 1600 mm and weighs around Modern Accessibility Kolbus Da 36 Manual Kolbus Da 36 Manual

Slide the twin hopper guides to match the width and height of the precut cover boards.

The DA 36 was revolutionary for its time because it introduced synchronized case feeding and continuous book block infeed. The manual from this era is not merely a parts list; it is a philosophy of mechanical synchronization, written in dense German technical prose (later translated into English, Spanish, and French for export markets).

If using roll-fed paper spine lining, thread the roll through the slitter/cutter assembly. KB-DA36-OM-EN Revision: 2

Are you setting up for a unique material (e.g., )? Share public link

Once you have a copy—whether original paper or a suspect PDF—you should digitize or augment it for modern use.

Use the manual adjustment wheels to position the doctor blade against the gluing roller. The goal is an even, micro-thin film. Excessive glue causes squeeze-out, warping, and messy turn-ins; insufficient glue causes delamination. Step 3: Configuring the Board and Spine Feeders The manual from this era is not merely

Pre-cut cardboard pieces for the front cover, back cover, and spine (rigid board or flexible paper) are housed in separate magazines. Mechanical pushers advance the boards simultaneously, dropping them accurately onto the moving, glued cover material. 3. Turning-In and Pressing

The cam-operated glue interrupt system must be checked weekly. Failure to do so may result in glue buildup on the forming station, leading to jams and potential tooling damage (refer to Section 7.2).