Asus H81m-k Motherboard Setup (2025)

: Two PS/2 ports (for older keyboards/mice), two USB 3.0 ports (blue), and two USB 2.0 ports. Networking : One Realtek Gigabit LAN (RJ45) port.

To tell the computer where to look for an operating system, you need to set the correct boot order. There are two ways to do this:

Once Windows is installed, you should download the following essential drivers from the official ASUS support page: : Intel Chipset Device Software. Audio : Realtek High Definition Audio Driver. LAN : Realtek Gigabit LAN Driver. asus h81m-k motherboard setup

Go to the Boot tab. Drag and drop your installation media (e.g., your Windows installation USB drive) to the top of the boot priority list.

Required only if you are using the onboard VGA/DVI ports without a dedicated graphics card. Troubleshooting Common Setup Issues : Two PS/2 ports (for older keyboards/mice), two USB 3

Go to Advanced -> SATA Configuration . Ensure that the SATA Mode Selection is set to AHCI . Do not use IDE mode, as AHCI is required for optimal SSD performance.

, you can drag and drop your drives to set the boot priority (e.g., setting a USB drive first to install Windows). If you need to update firmware, use the ASUS EZ Flash utility within the BIOS to update from a USB drive. There are two ways to do this: Once

ASUS UEFI BIOS will default to "EZ Mode." Here you can see: