Nalco 77352 Sds ((new)) -

Immediately flood with clean water for at least 15 minutes while holding eyelids apart. Remove contact lenses. . Skin Contact

Warning (not Danger, indicating lower acute hazard than corrosive materials like concentrated acid).

NALCO 77352 is primarily used to control algae, bacteria, and fungi in recirculating mechanical systems. Unchecked biological fouling forms insulating layers on heat exchangers, spikes energy consumption, and promotes microbiologically influenced corrosion (MIC) that physically destroys alloy pipework.

Posting an SDS binder is not enough. According to OSHA, you must train employees on where the SDS is located and how to interpret Sections 4-8 specifically for Nalco 77352. nalco 77352 sds

In the event of accidental exposure, immediate action is required to mitigate tissue damage and systemic toxicity:

Unlike common oxidizing alternatives like chlorine or bromine, NALCO 77352 does not break down rapidly at elevated pH scales. This makes it an ideal pick for modern alkaline water chemistry configurations. Furthermore, its stabilization system does not rely on copper chemistry, meaning operations can introduce it into multi-metal networks without accelerating galvanic degradation. Chemical Composition and Active Ingredients

While Nalco periodically updates their SDS sheets, the structure follows the globally harmonized 16-section format. Below is what you can reasonably expect to find in the Nalco 77352 SDS. Immediately flood with clean water for at least

NALCO 77352 is registered in various European countries, and its active ingredients have been notified under the European . The product must always be applied in accordance with appropriate national and local regulations.

Isothiazolinones (including 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one) Stabilizers/Inerts: Contains magnesium nitrate 2. Hazard Identification and GHS Classification

Dispose of contents and container in accordance with local, regional, and national regulations. As a chemical waste, it should not be discharged into the sewer system without proper permits. It is often classified as hazardous waste due to its corrosivity (high pH). Skin Contact Warning (not Danger, indicating lower acute

If a person breathes in mists or vapors, move them to fresh air immediately. If they have stopped breathing, administer artificial respiration. If breathing is difficult, give oxygen. Seek immediate medical attention.

The NALCO 77352 SDS, in particular, provides detailed information on the product's composition, physical and chemical properties, hazards, and safety precautions. Having access to this information is crucial for ensuring the safe handling and use of the product, as well as compliance with regulatory requirements.

Wash out the mouth with water. Do not induce vomiting unless instructed by medical professionals, as the corrosive fluid can cause secondary esophageal burns. Firefighting and Explosion Data