Eppendorf 5402 Manual Updated __hot__ ✦ Trending
18 or 24-place rotors for 1.5 mL / 2.0 mL microcentrifuge tubes Timer Range: 1 to 99 minutes, or continuous "Hold" mode
For those looking for current documentation, technical guides and software updates are available through the Eppendorf Download Center . ? Centrifuge 5420 - Centrifuge for Eppendorf tubes
| Use case | Recommended model | |----------|-------------------| | General microcentrifuge | Eppendorf 5425 (21,300 ×g, quieter, aerosol-tight rotors) | | High-throughput (30+ tubes) | Eppendorf 5430 (30 × 1.5/2.0 mL, refrigerated option) | | Swing-out for PCR strips | Eppendorf 5702 (low-speed, clinical style) |
-9°C to 40°C (Maintains 4°C at maximum speed).
. It is designed to hold up to 18 tubes (1.5 mL to 2.0 mL) and reaches speeds of up to 14,000 RPM. No reviews Featured Enhancement: "Fast Cool" Mode eppendorf 5402 manual updated
If you need the or the technical service manual
The unit accepts various rotors to accommodate smaller tube sizes like 250 µl, 400 µl, and 500 µl, though these often require specific adapters .
No rotor detected; ensure the rotor is properly seated and secured .
The rotor must always be loaded symmetrically. 18 or 24-place rotors for 1
Ensure opposite tubes are equal in weight, not just fluid volume. Density differences matter.
Vacuum the dust from the ventilation grids. If cooling fails entirely, the compressor requires professional servicing. Microswitch failure or lid latch misalignment.
Power down the unit. Vacuum dust and lint away from the ventilation grills. Ensure the unit has at least 6 inches of clearance from laboratory walls for proper airflow. If cooling fails entirely, contact an authorized service technician. Drive motor error or tachometer malfunction.
Operating laboratory equipment safely requires strict adherence to technical limitations. Below are the core technical specifications for the Eppendorf 5402. 14,000 RPM (Rotations Per Minute) Maximum RCF: 16,000 × g (Relative Centrifugal Force) Temperature Range: -9°C to +40°C No rotor detected; ensure the rotor is properly
The your machine is currently showing
Once the timer reaches zero, the braking system will engage. Wait until the rotor comes to a complete, silent stop before pressing the lid release button. 4. Routine Maintenance and Care
The Eppendorf 5402 is a high-performance, versatile centrifuge designed to meet the diverse needs of modern laboratories. With its advanced features, user-friendly interface, and robust construction, this centrifuge has become an essential tool for researchers, scientists, and laboratory professionals worldwide. To ensure that users can harness the full potential of this instrument, Eppendorf has provided a comprehensive manual that outlines its operation, maintenance, and troubleshooting. In this article, we will explore the Eppendorf 5402 manual, highlighting key features, updates, and best practices to optimize your laboratory experience.
| Symptom | Probable Cause | Corrective Action (Per Manual) | | :--- | :--- | :--- | | | Lid not locked / Safety interlock fault | Close lid firmly; check lid latch sensor. | | | Carbon brushes worn (older models) | Replace brushes. | | Excessive vibration | Rotor imbalance | Balance tubes to within 0.5g. | | | Damaged rotor | Inspect for corrosion; replace rotor. | | No display/power | Fuse blown | Check main fuse at rear of unit. | | Lid will not open | Power failure | Use Emergency Release slot. | | | Lid lock motor defect | Contact service technician. |
