!!hot!!: Din 53357 Pdf

The test involved several key steps that must be strictly followed to ensure meaningful results.

⚠️ DIN standards are copyright-protected. Free PDFs from unofficial sites are often outdated, incomplete, or illegal copies.

You will often find "DIN 53357" in PDF catalogs for older products, but for modern compliance, it has been superseded by:

German standard as of November 1, 2013. It was used to determine the bond strength and adhesion properties of laminated or coated plastic films and sheets. eurolab.net Current Replacements and Recommendations din 53357 pdf

To determine the adhesion or peel strength of plastic sheets and laminated materials. Testing Method:

Uses five specimens (15 mm wide and 250–300 mm long) taken across the material slab. eurolab.net Technical Specifics The test is often performed using a 90° peel angle (also known as the German wheel peel test). Apparatus:

Provides access to international equivalents. Keywords for Searching Equivalents The test involved several key steps that must

Prüfung von Kunststoffbahnen und -folien; Trennversuch der Schichten (Testing of plastic sheets; adhesion test)

Ensuring that laminated films do not delaminate during use.

To determine the force required to separate bonded or laminated layers of plastic film. Methods: It typically includes two variations: You will often find "DIN 53357" in PDF

, it remains a frequent reference in technical specifications for packaging, automotive interiors, and protective coatings. Intertek Inform 1. Scope and Core Purpose

If you are in need of the exact PDF, it is recommended to search on the DIN Media portal or verify the required version with your client/contractor.

The standard made very precise specifications for sample preparation. For Method A, five longitudinal and five transverse specimens are taken from the roll. The separation length is at least 40 mm, achieved by mechanical separation or, in the case of Method B, by the brief action of a suitable solvent（不得超过 70°C）. The conditioning is also defined: the specimens are tested in a standard atmosphere at 23°C ± 1°C and 50% ± 2% relative humidity. The peel speed is 100 mm/min.

: Results are often expressed in units such as Newtons per width (e.g., 96N/5cm) to quantify the force needed for separation. 3. Current Status and Successors