With the driver installed, a few final configurations will ensure your printer operates correctly.
If you encounter issues during the driver download or installation process, try the following:
If the driver downloaded as a compressed .zip folder, right-click the file and choose Extract All .
To download and install the driver for your TVS Electronics LP 46 Lite barcode printer, follow these steps: Visit the Official Support Page : Navigate to the TVS Electronics Product Downloads Select Your Category Label Printers from the list of product types. Choose the Model : Locate and select LP 46 Lite from the product dropdown. Download the Driver : Download the latest Windows Driver (typically a compressed .zip file). Installation Extract the downloaded zip file. Run the setup program and follow the Seagull Driver Wizard instructions. tvs lp 46 lite barcode printer driver download
: If the official site is unavailable, you can find verified Windows drivers on the Seagull Scientific (BarTender) TVS page Installation Connect the printer via Run the downloaded file and follow the on-screen prompts. The driver supports Windows, Mac, Chromebook, and Linux TVS Electronics Key Specifications for Setup
Under the tab, click New to create a custom stock size.
: Use the search bar on the site or look under the "Printers" or "Label Printers" category for the LP 46 Lite . With the driver installed, a few final configurations
Click to create a custom label size that perfectly matches your physical roll dimensions (e.g., 4" x 2" or 2" x 1").
Before configuring your software environment, ensure your specific hardware profile matches the standard configuration matrix:
Choose USB when prompted for the connection type. Choose the Model : Locate and select LP
After installation, you must configure the print settings to match your specific label sizes.
| Specification | Detail | Source | | :--- | :--- | :--- | | | Direct Thermal & Thermal Transfer | | | Print Resolution | 203 DPI (8 dots/mm) | | | Max Print Speed | Up to 6 inches per second (152.4 mm/sec) | | | Max Print Width | 108 mm (4.25 inches) | | | Memory | 8 MB Flash, 16 MB SDRAM | | | Connectivity | USB 2.0 (Hi-Speed) | | | Supported OS | Windows, Mac, Chromebook, Linux | | | Ribbon Capacity | Up to 300 meters | | | Sensors | Gap/Black Mark Reflective | | | Emulations | EPL, ZPL, ZPL II (out-of-the-box) | |
Last updated: October 2025. This guide is for informational purposes. Always refer to the official TVS Electronics documentation for warranty and specific technical support.