Anilam Mini Wizard A163 Manual Jun 2026
Moving the table 0.200″ causes the DRO to indicate 0.400″.
Enter the parameter mode or toggle the dedicated axis direction switch.
Common resolutions:
Do not pay $50 for a photocopy on auction sites. Here is where to get it legally and free: anilam mini wizard a163 manual
For turning applications using the Mini Wizard Lathe Series addon, tracking the cross-slide (X-axis) requires either true physical travel or account-doubled part dimensions:
Because these units are several decades old, they can exhibit wear-related symptoms. Use this checklist to diagnose common failures: The Display is Dead or Flickering
Instant switching between Inch and Metric (mm) measurement systems. Moving the table 0
: If an axis skips or provides erratic readings, the Practical Machinist community recommends cleaning the internal encoders and checking the reader-to-scale alignment.
Understanding the core functions, parameter setup, and maintenance guidelines outlined in the technical documentation helps operators prevent accuracy errors, calibrate glass scales, and diagnose hardware issues. Key Specifications and Hardware Overview Anilam Mini Wizard Go to product viewer dialog for this item.
Changes whether moving the table to the right registers as positive or negative numbers. Toggling this parameter saves you from physically flipping the scale upside down. Here is where to get it legally and
The Mini Wizard A163 is a 2-axis display console designed primarily for basic milling, drilling, and turning applications.
A: No. The A163 is a specific 2-axis variant. The Mini Wizard 100 is a single-axis, and the 200 is a basic 2-axis with fewer features. The button layout and setup codes differ. Use only the A163 manual.
The A163 was capable of "canned cycles"—pre-programmed routines for common tasks like facing, pocketing, or drilling. The manual lists these G-code equivalents and M-codes specific to Anilam.
Uses a bright Vacuum Fluorescent Display (VFD) for high visibility in shop environments.