Sinotimer Svp-916 Manual Pdf _top_

Available in 40A, 63A, and 80A models.

Available in 40A, 63A, or 80A configurations.

Over-voltage, Under-voltage, (some models include Over-current) Rated Voltage: AC 220V/230V, 50/60Hz

Once voltage returns to the "Recovery Value" and stays stable for the "Fault Recovery Delay Time," the device automatically restores power.

If the grid voltage exceeds the value set in A2 , the display flashes the current voltage, and the output cuts off within the time specified in A4 . Once the grid stabilizes below the recovery voltage ( A3 ), the device counts down the recovery delay ( A10 ) and restores power. Sinotimer Svp-916 Manual Pdf

The SVP-916 is an automatic voltage and current protective relay designed for networks. It acts as a smart safeguard for residential and industrial electronics, protecting against unexpected voltage spikes, brownouts, and overcurrent scenarios. Key Applications: Household distribution boxes. Single-phase electrical equipment protection.

(Over-current protection) to ensure that if a motor stalls and draws too much power, the SVP-916 cuts it off before a fire can start. The Moral of the Story

Imagine a summer storm or a sudden grid malfunction. The voltage spikes—climbing toward a level that could fry your refrigerator’s compressor or melt the delicate circuits of your laptop.

Indicates power is currently supplied to the output. Available in 40A, 63A, and 80A models

The official manual covers:

Note: If under-voltage action time (P06) is set longer than 0.3s, the internal relay may not function correctly during a total power failure.

This article serves as a comprehensive guide based on the , covering installation, setting configuration, and troubleshooting to ensure long-term electrical safety. 1. Key Features and Technical Specifications Model: Sinotimer SVP-916 (Adjustable)

Displays the current real-time amperage load (A). Indicator Lights: If the grid voltage exceeds the value set

: You decide how much stress the system can take ( for high voltage, for low voltage). The Current Limit : You set the

To enter the setting mode, press and hold the button for 3 seconds. Use the Up/Down arrows to adjust values. Function Description P01 Power-on Delay Time 1 – 500 seconds P02 Over-voltage Protection Value 221V – 300V – OFF P03 Over-voltage Recovery Value 220V – 299V P04 Over-voltage Protection Action Time 0.1s – 10s P05 Under-voltage Protection Value 150V – 219V – OFF P06 Under-voltage Recovery Value 151V – 220V P07 Under-voltage Protection Action Time 0.1s – 10s P08 Over-current Protection Value 1A – 63A/80A – OFF P09 Over-current Action Time 0.1s – 30s P10 Fault Recovery Delay Time 2s – 120s P11 Reset Mode AU (Auto) / HA (Manual) P12 Fault Inquiry (Last 5 records) UL (Under), UH (Over), IH (Current) P13 Finish and Exit Operational Notes

Search for the official Sinotimer catalog site under the "Downloads" or "Support" tab.

Connected to the top terminals marked "N" (Neutral) and "L" (Live). Output (Load): Connected to the bottom terminals.