Infineon Memtool 49 Jun 2026

Available on the official product page

Infineon Memtool 4.9 offers an array of memory manipulation capabilities optimized for speed and safety:

Common batch commands include:

The Infineon Memtool version 4.9 is a free software utility designed for on-chip memory programming across various Infineon microcontroller families, including the AURIX/TriCore

You can create a (often with a .mtb extension) containing a series of Memtool commands. Launching Memtool with this file as the only argument will execute the commands automatically. infineon memtool 49

Provides options to set and reset chip or sector protection for on-chip memory.

单击右侧的“Program all”按钮，Memtool将把数据写入芯片Flash中。烧录过程中，状态显示窗口会详细列出每一阶段进度和操作结果。

Which or wiggler are you using to connect to the board?

Infineon MEMTool 49 offers a range of features that make it an indispensable tool for MEMS development. Some of the key features include: Available on the official product page Infineon Memtool 4

Click on > Change... to open the target selection wizard.

下面按详细步骤逐一讲解：

Full compatibility with TriCore, AURIX (TC2xx, TC3xx, TC4xx), Traveo II, XMC1000, XMC4000, and legacy C166/XC166/XC2000 architectures.

: Run the setup with administrator permissions on a 64-bit Windows machine. to open the target selection wizard

Programming with Memtool 4.9 typically follows a structured sequence within its graphical user interface: Target Configuration:

https://www.infineon.com/cms/en/product/promopages/das/

在AURIX系列芯片中，正确且完整的UCB内容尤为重要，因为修改UCB的设置不当有可能直接导致器件锁死。不过Memtool的优势正在于此：它允许工程师以免费方式访问这部分敏感区域，从而使开发者能够自由调整芯片安全选项、启动配置等。当然，官方提示免费版Memtool不适合用于大规模生产场景，用户需要注意这一点。