: Check the 12-24V power supply and cable connections.
ProSecure Opti Combi Manual English: Complete Installation & Programming Guide
The Opti Combi has a hierarchical access system: prosecure opti combi manual english
Use the mechanical adjustment screw next to the infrared lens to tilt the safety curtain. Ensure the rows of spots sit directly in front of the moving door leaf path without hitting the door itself.
Press the button on the circuit board once. The LED will flash rapidly in green and red. Step completely out of the detection zone for 10 seconds. : Check the 12-24V power supply and cable connections
ProSecure Opti Combi offers several modes:
For service or parts, contact your local Prosecure distributor. Keep this guide near the oven for quick reference. Press the button on the circuit board once
Drill the wire routing hole (Ø 8mm) and the two pilot holes for the mounting screws (Ø 3mm).
Remove all objects and ensure no one is within the detection area before powering on.
This article is for informational and guidance purposes only. While we have outlined the structure and content of the , we do not host copyrighted PDFs directly. You must source the official document from the manufacturer or an authorized dealer.
Connect the sensor according to the electrical schematic in the manual. 2.2 Initial Setup and Power-Up