Bonavita Hudson Ii Lifestyle Crib Instructions Extra Quality Site
Always use hand tools. Power drills can easily over-tighten screws, stripping the wood or cracking the hardware brackets.
Insert the remaining long Allen bolts through the corner frames into the front panel.
Assemble the crib directly in the nursery. Fully built cribs rarely fit through standard bedroom doorways. Clean the floor and lay down a large blanket or the cardboard packaging to prevent scratching the wood finish.
The daybed configuration allows open access while retaining three enclosed sides, perfect for older toddlers. Remove the toddler guard rail entirely. Leave the front completely open.
| Issue | Likely Cause | Solution | | :--- | :--- | :--- | | | Bolts not tightened after assembly | Loosen all, re-align, tighten in sequence (back to front). | | Front rail doesn’t align | Mattress support is in wrong height | Remove mattress support, check bracket holes are level. | | Scratches on wood | During assembly | Use a furniture touch-up marker (light wood) or contact Bonavita for a repair kit. | | Missing hardware | N/A | Contact Million Dollar Baby Customer Service (see below). | bonavita hudson ii lifestyle crib instructions
If you are missing specific pieces for your setup, let me know you are currently trying to assemble or which specific hardware parts you are missing. I can help you locate the exact dimensions or find compatible aftermarket parts. Share public link
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Hidden inserts that slide into the wood to receive and lock the bolts.
Use the Allen wrench to firmly tighten every bolt on the headboard, footboard, and sides. Always use hand tools
Place your mattress slats or box spring across the rails before adding the full-size mattress. Maintenance, Cleaning, and Care
Helpful for aligning barrel nuts inside the wood panels. Hardware Checklist
When your child reaches 35 inches in height or begins attempting to climb out of the crib.
: Attach the headboard to the crib sides using Allen bolts and washers. Secure these through the pre-drilled holes on the bottom legs. Attach the Footboard Assemble the crib directly in the nursery
Lift the front panel up to the open side of the crib structure.
Align the left back post with the side of the panel. Insert the long Allen bolts through the post into the panel.
Align the front footboard panel with the open front of the crib. Insert barrel nuts into the inner holes of the side panels.