Fixing the "DVB Select Type" error on a Samsung TV requires adjusting the broadcasting signal settings in the channel setup menu. This error typically occurs when the television's internal tuner is configured to search for the wrong type of incoming digital signal.
If you rely on an antenna or direct cable wall outlet for your channels, the tuner requires a flawless physical connection to decode the DVB signal.
Tip: Inspect the cable for damage and ensure it's not loose. 2. Correct the DVB Type in Settings
For a direct cable connection without a separate box. DVB-S/S2: For a satellite dish connection.
If the "DVB Select Type" notice is stuck on your screen, try these steps in order:
The screen flickered. The Service Menu vanished.
Keep holding it until the TV turns off and then turns back on automatically. Release the button and check if the error is gone.
If the physical connection is secure but the error persists, the TV needs to re-map its digital channels based on your specific DVB broadcast type. Press the button on your remote and go to Settings .
If your TV cannot connect to the internet due to the setup loop, use a computer to download the latest firmware from the official Samsung Support website for your exact model number.
Do not turn off the TV while the update downloads and installs. 5. Reset the TV to Factory Defaults
Select . (Note: If this option is greyed out, make sure your source is set to "TV" first). Select Auto Tuning or Auto Program .
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
If you select the correct DVB type but the error persists or no channels are found, your TV is not receiving a signal.