Zeus Z3 Digital Lock Manual [work] -

The lock will issue a voice prompt or a series of beeps confirming the system has reverted to factory defaults. All stored users, fingerprints, and codes are now erased.

If you forgot your Master Code or the lock is glitching, a hard reset clears everything (codes, fingerprints, cards).

Route the data cable through the designated opening in the mounting plate.

Batteries are dead upside down. Fix:

is a popular digital lock model, often distributed in Singapore by Zansan Digital Lock

| Error Symptom | Likely Cause | Solution (from the manual) | | :--- | :--- | :--- | | | Invalid fingerprint or code. | Try again. After 5 failures, the lock will freeze for 60 seconds. | | Motor runs but bolt doesn't move | Deadbolt misalignment. | Loosen the interior screws by 1/4 turn. Sand the strike plate hole larger. | | Keypad works but handle stuck | Spring latch is jammed. | Turn the handle UP first, then DOWN. Lubricate with graphite spray. | | RFID card not working | Card not registered or damaged. | Re-add the card via Master Menu > Option 3. | | Can't add fingerprint | Sensor dirty or dry finger. | Clean sensor with dry cloth. Moisturize fingertip. |

. He wasn't a tech-savvy man; he preferred the satisfying click of a physical key. But the city was changing, and his old brass bolt had been replaced by the sleek, obsidian face of the Z3. Zeus Z3 Digital Lock Manual

Secure the interior unit to the mounting plate.

If you forget your Master PIN, locate the Reset button inside the battery compartment. Press and hold for 5 seconds to restore factory defaults.

Use the App interface or enter *69# [Admin Password] # to clear data FCC Report. 5. Troubleshooting and FAQ The lock will issue a voice prompt or

: If you have never changed it, the factory default for many digital locks is Key Features & Maintenance Digital Door Lock | How to Register Your PIN Code

Press 5 followed by 2 to toggle . Scramble PIN (Anti-Peeping Protection)

Locate the physical Reset button inside the battery compartment. Press and hold it with a pin for 5 seconds until you hear a long beep or voice prompt confirming the factory reset. 5. Everyday Use & Key Features Unlocking the Door Via PIN: Touch screen -> Enter PIN -> Press # . Via Fingerprint: Place registered finger on the scanner. Via RFID: Tap card against the sensor screen. Route the data cable through the designated opening

[====== BATTERY COMPARTMENT OVERVIEW =====] +-----------------------------------------+ | [ AA 1.5V ] | [ AA 1.5V ] | +-----------------+-----------------------+ | [ AA 1.5V ] | [ AA 1.5V ] | +-----------------------------------------+ | [Reset Hole] [Reg. Button] | +-----------------------------------------+ Low Battery Warning