Skip to content
English
Need additional support? Submit a request!
Contact us
  • There are no suggestions because the search field is empty.

V2ray Mikrotik Upd -

Create a mount point in RouterOS:%%MAGIT_PARSER_PROTECT%% disk container mounts add name=v2ray_config src=v2ray/config.json dst=/etc/v2ray/config.json Step 3: Pull and Start the Container

/ip/firewall/address-list/add list=v2ray_targeted_traffic address=93.184.216.34 comment="Example Target IP" Use code with caution. Step 2: Configure Mangle Rules for Policy Routing

Setting Up V2Ray on MikroTik RouterOS Integrating allows you to route your entire network traffic through a secure, obfuscated proxy tunnel directly at the router level. This setup eliminates the need to configure V2Ray clients on individual devices like smartphones, laptops, and smart TVs.

Single-device solution; no extra hardware needed; minimal physical footprint. v2ray mikrotik

To configure your MikroTik router as a V2Ray client, we will need to set up a virtual network for the container, define specific routes, and configure firewall rules to direct traffic through the proxy.

: Acts as a bridge, converting the SOCKS5 proxy from Xray into a network interface that RouterOS can route traffic through. 3. Traffic Routing and Firewall

# Mark connection /ip/firewall/mangle/add chain=prerouting dst-address-list=v2ray_targeted_traffic action=mark-connection new-connection-mark=v2ray_conn passthrough=yes src-address=192.168.88.0/24 # Mark routing based on the connection mark /ip/firewall/mangle/add chain=prerouting connection-mark=v2ray_conn action=mark-routing new-routing-mark=to_v2ray passthrough=no Use code with caution. Step 3: Establish the Custom Routing Table and Route works on any MikroTik device

{ "inbounds": [ "port": 10808, "protocol": "socks", "settings": "auth": "noauth", "udp": true , "tag": "socks-in" , { "port": 10809, "protocol": "http", "settings": {}, "tag": "http-in" } ], "outbounds": [ "protocol": "vmess", "settings": "vnext": [ "address": "YOUR_SERVER_IP_OR_DOMAIN", "port": YOUR_SERVER_PORT, "users": [ "id": "YOUR_V2RAY_UUID", "alterId": 0, "security": "auto" ] ] , "tag": "proxy-out" , { "protocol": "freedom", "settings": {}, "tag": "direct-out" } ] } Use code with caution.

--

/ip route add gateway=192.168.88.10 routing-mark=proxy-route and a split-device proxy gateway model.

Zero overhead on the router CPU; works on any MikroTik device; supports heavy cryptographic loads.

: Every device connected to your Wi-Fi—even those that don't support VPN apps—is automatically protected.

This guide provides a comprehensive framework for integrating V2Ray with MikroTik RouterOS using two primary architectures: containerized execution directly on the router, and a split-device proxy gateway model. Architectural Paradigms

Direct the marked traffic to the V2Ray client device.

{ "log": "loglevel": "warning" , "inbounds": [