V2000-c User Manual -

⚠️ Don’t use a card from another device without formatting – it may cause recording errors.

Supports RFID card only , PIN only , or Card + PIN for enhanced security.

Supports between 1,000 to 2,000 users , depending on the specific model variant.

Note: Performing a hardware pin initialization only rolls back the Administrative Master Code to standard factory settings; existing user tokens and keycards stored in memory remain intact. v2000-c user manual

To configure the V2000-C, you must enter . While in programming mode, the indicator light will change color (usually flashing red or amber), indicating that the system is ready to receive commands.

is a high-quality stainless steel RFID access control system

For more information on the manual or to find specific variants, check the V2000-C manual download on . ⚠️ Don’t use a card from another device

The most valuable part of any is the troubleshooting table. Common entries include:

: Cards or passwords can be assigned to user slots via the command entry system. Access Control

[ Power OFF ] ---> [ Move Jumper S16 to Pins 2 & 3 ] ---> [ Power ON ] | [ Power ON ] <--- [ Move Jumper S16 to Pins 1 & 2 ] <--- [ Power OFF ] Note: Performing a hardware pin initialization only rolls

The device can be installed as a standalone unit or as a Wiegand reader. Power Requirements : Standard 12V DC power supply. Inputs/Outputs Wiegand 26 : Can act as an external reader for other controllers. Doorbell/Exit Button

The buzzer will emit a long confirmation beep, signifying successful token enrollment. Setting the Global Door Access Mode

The search for a "V2000-C user manual" can sometimes be confusing because the term refers to several very different devices from different manufacturers. Each one has its own unique setup, operation, and maintenance requirements.

Undo the specialized bottom screw to detach the wall bracket.

from the door frame to ensure the reader doesn't interfere with the door's swing.