Several online communities have accumulated driver files over the years. Noteworthy resources include:
Click and point the installer to your Diagbox driver directory (e.g., C:\APPLIC\LXS\DRIVER\ ) or your extracted standalone driver folder.
Disclaimer: This article provides information for informational purposes only. Use of diagnostic software and hardware, particularly clones, should be done with care. To make sure this works for you, could you tell me:
To confirm everything is working, run the PSA Interface Checker utility. This tool should detect your interface, display its serial number, and show the current firmware version (e.g., APPLI_XS_Fugi_P106138A). In Device Manager, your interface should be recognized without any warning icons. actia psa xs evolution 9780z5 driver link
The Actia PSA XS Evolution was designed for Windows XP, which means it does not have official support for Windows 10 or 11. This lack of support is the root cause of many driver problems. For guaranteed functionality, you have two options:
If you have Diagbox installed, the native drivers reside in your local directory. Look for a folder named PSA_Drivers or navigate to: C:\AWRoot\bin\fi\APPLIC\DRIVER\ Step 2: Disable Driver Signature Enforcement
The PSA Interface Checker utility is an invaluable tool for verifying that your interface is properly recognized. It should detect your interface and display information such as the serial number, firmware version, and reference number (e.g., “963830C/PEUGEOT”). In some cases, users have reported using this tool to change how their interface is recognized by applying a firmware update. In Device Manager, your interface should be recognized
Follow these steps to safely install and register your Actia PSA XS Evolution interface on Windows. Step 1: Prepare Your Operating System
Actia PSA XS Evolution 9780Z5 – Driver & Setup Link
Before installing the driver, ensure your system is prepared to avoid communication errors: In some cases
If you have issues with a particular version, check the discussion on the French Car Forum where users discuss the compatibility of the 9780Z5 with Windows 10.
Browse to your Diagbox driver folder (e.g., C:\APPLIC\LEXIA\Driver\ ) and select the .inf file.
Many technicians run Diagbox on a Windows 7 32-bit Virtual Machine (VMware or VirtualBox) to avoid Windows 11 compatibility issues. If you are using a VM: Boot the guest operating system completely first. Plug in the Actia hardware.
It is important to note that not every version of DiagBox works with every version of the interface firmware. Older vehicles (pre-2010) generally work well with DiagBox version 7.83, while newer models may require more recent software versions. The version of the “PSA Interface Checker” should display your current firmware version; for instance, “APPLI_XS_Fuji_P106138A V4.3.3” is a known firmware version found on some clone interfaces.
Repeat the Disable Driver Signature Enforcement steps and manually reinstall the driver path from your original installation directory.
