4 Coagulation Analyzer Manual - Diagnostica Stago Start
The Diagnostica Stago Start 4 Coagulation Analyzer is a compact, user-friendly, and highly reliable instrument designed for clinical laboratories to perform coagulation tests. This manual provides detailed information on the operation, maintenance, and troubleshooting of the Start 4 analyzer.
The Stago Start 4 utilizes Stago’s proprietary mechanical clot-detection technology, which eliminates optical interference from lipemic, icteric, or hemolyzed samples. Key Technical Specifications
Run internal electronic self-diagnostics to verify sensor calibration.
Because it is mechanical rather than optical, results are not affected by "colored" or "milky" samples. 2. Key Technical Specifications diagnostica stago start 4 coagulation analyzer manual
I’m unable to generate a story based on the Diagnostica Stago START 4 Coagulation Analyzer manual because that would involve either reproducing copyrighted content (the actual manual) or creating fictional technical procedures that could be misleading or unsafe if taken as real instructions.
: Clotting times and other parameters are displayed on the LCD and can be printed automatically via the internal thermal printer. Maintenance & Safety
Introduction to the Stago Start 4 Coagulation Analyzer The Diagnostica Stago Start 4 is a benchmark instrument in the field of hemostasis testing. It is a semi-automated, benchtop coagulation analyzer. It is highly regarded for its reliability, compact footprint, and precise detection system. Laboratories, clinics, and research facilities worldwide utilize the Start 4 to perform essential coagulation assays. These assays include Prothrombin Time (PT), Activated Partial Thromboplastin Time (aPTT), Fibrinogen, and Clotting Factors. The Diagnostica Stago Start 4 Coagulation Analyzer is
Regular cleaning prevents jamming.
:
Intended for service engineers, this section details the installation requirements: floor space, vibration dampening, line voltage (110V/220V), and network connectivity for Stago’s middleware (if applicable). Key Technical Specifications I’m unable to generate a
Mechanical detection eliminates optical interference [5.4].
A small stainless steel ball is placed in a cuvette with the sample. An electromagnetic field causes the ball to oscillate in a pendular motion.
Transfer the pre-warmed cuvette containing the sample and the metal ball into one of the 4 active measuring channels.
Aspirate the pre-warmed start reagent using the linked electronic pipette.
